TA-Smart-Dp

2-way Smart electronic differential pressure controller with flow, temperature and power measurement capabilities

The ultrasonic flow measurement technology combined with unique actuation algorithms capabilities provide best-in-class control performances. TA-Smart-Dp is designed to keep a stable differential pressure over the load. This enables accurate and stable conditions to provide superior control valve authority for modulating control valves, additionally it can limit noise and simplify the balancing procedure. Its compact arrangement and simple set-up reduces installation and commissioning time.

Technical SpecificationsTA-Smart-Dp_EN_low.pdf

Download BIM

Product branding

Features and Benefits

Precise and stable differential pressure control

Delivers desired differential pressure ensuring accurate balancing.

Optional cloud connection

Easy remote access to data and configuration parameters allows to verify and adjust system performance.

High measurement accuracy

High flow and temperature measurement accuracies in all configurations (medium type, and temperature) for all flow regimes.

Compactness and limited number of components

Reduces installation time and space requirements facilitating retrofit installation.

Convenient, reliable setup

Fully customizable and commissionable using Bluetooth enabled smart device reducing commissioning and diagnostic time.

Easy diagnostics

Continuous measurement (flow, temperature, power...) enables accurate error identification in system hydronics.

Versatility in communication

Digital (key Bus protocols and MQTT) and Analog (0(2)-10 VDC or 0(4)-20 mA).

Applications

Heating and cooling systems.

Functions

Reading (flow, power, energy, supply/return temperature, ΔT, position)

Differential pressure control

Measuring (ΔpL)

Pre-setting Δp over the load (ΔpL)

Wireless

Thread

Bluetooth Low Energy (BLE)

Pressure class [PN]

DN 15-50: PN 25

DN 65-125: PN 16, PN 25

Differential pressure (ΔpV)

Max. differential pressure (ΔpVmax): 400 kPa = 4 bar

Closing pressure: 600 kPa = 6 bar

ΔpVmax = The maximum allowed pressure drop over the valve to fulfill all stated performances.

Setting range, differential pressure Dp sensor:

10-100 kPa

40-400 kPa

Max. differential pressure (Δpburst):

500 kPa = 5 bar

1200 kPa = 12 bar

Δpburst = Maximum differential pressure that may be applied to the sensor.

Flow range

The flow ranges (qsetmin - qnom) for different dimensions:

DN 15: 160 - 1200 l/h

DN 20: 380 - 1900 l/h

DN 25: 540 - 2700 l/h

DN 32: 920 - 4600 l/h

DN 40: 1560 - 7800 l/h

DN 50: 2680 - 13400 l/h

DN 65: 5800 - 29000 l/h

DN 80: 8640 - 43200 l/h

DN 100: 14200 - 71000 l/h

DN 125: 22400 - 112000 l/h

Minimum controllable flows (qcontr.min) DN 15 0.33% of qnom, DN 20-125 0.5% of qnom.

qsetmin = Minimum settable flow.

qnom = Maximum settable flow.

Temperature

Max. working temperature: 110°C

Min. working temperature: -10°C

Operating environment: 0°C – +50°C (5-95%RH, non-condensing)

Storage environment: -20°C – +70°C (5-95%RH, non-condensing)

Dp sensor

Min. working temperature: -15°C

Operating environment: -15°C – +80°C (5-95%RH, non-condensing)

Max. working temperature: 80°C

Storage environment: -40°C – +80°C (5-95%RH, non-condensing)

Media

Water or neutral fluids, water-glycol mixtures (0-57%).

Supply voltage [V]

24 VAC/VDC ±15%. Frequency 50/60 Hz ±3 Hz

Dp sensor

18-33 VDC or 24 VAC +15/-10 % (0-10 V)

Power consumption

Power consumption:

DN 15-50:

Operation: < 4.0 W (24 VDC); < 5.6 VA (24 VAC)

Standby: < 1.9 W (24 VDC); < 3.3 VA (24 VAC)

DN 65-80:

Operation: < 5.8 W (24 VDC); < 10 VA (24 VAC)

Standby: < 1.9 W (24 VDC); < 3.3 VA (24 VAC)

DN 100-125:

Operation: < 7.7 W (24 VDC); < 10.8 VA (24 VAC)

Standby: < 1.9 W (24 VDC); < 3.3 VA (24 VAC)

Input signal

By BACnet/Modbus

Output signal

0(2)-10 VDC, max. 8 mA, min. 1.25 kΩ.

BACnet/Modbus

Measurement accuracy

Flow:

Water: From 2% accuracy at 100% of qnom to 2.4% accuracy at 5% of qnom (according MID-Class 2 EN1434).

Water+glycol: From 3% accuracy at 100% of qnom to 4% accuracy at 5% of qnom (according to MID-Class 3 EN1434).

(see “Flow accuracy”).

Temperature difference:

±0.1 K @ ΔT = 6 K (for cooling)

±0.15 K @ ΔT = 10 K (for heating)

±0.2 K @ ΔT = 20 K (for heating)

Dp sensor:

<2.5 kPa for 10-100 kPa sensor

<10 kPa for 40-400 kPa sensor

Leakage rate

DN 15-50: Leakage rate < 0.01% of q, nom with correct flow direction (Class IV according to EN 60534-4)

DN 65-125: Tight sealing with correct flow direction (Class V according to EN 60534-4)

Pipe connection

DN 15-50: External thread according to ISO 228.

DN 65-125: Flanges according to EN-1092-2, type 21. Face to face length according to EN 558, series 1.

Temperature sensor cable

10 m halogen free cable on request.

DN 15-50: 3 m halogen free

DN 65-125: 5 m halogen free

Material

DN 15-50:

Valve body: AMETAL®

Valve insert: AMETAL®

Valve plug: AMETAL® and PTFE

Spindle: Stainless steel

Spindle seal: EPDM O-ring

Internal plastic parts: PPS

Springs: Stainless steel

O-rings: EPDM

Temperature housing: AMETAL®.

DN 65-125:

Valve body: Ductile iron EN-GJS-400-15

Valve insert: Ductile iron EN-GJS-400-15 and brass

Valve plug: Stainless steel and EPDM O-ring

Valve seat: Stainless steel

Spindle: Stainless steel

Spindle seal: EPDM

Springs: Stainless steel

O-rings: EPDM

SmartBox (DN 15-125):

Cover: PC/ABS, red.

Housing: PC/ABS, TPE.

Actuators:

DN 15-50:

Cover: PC/ABS GF8, white RAL 9016, grey RAL 7047.

Housing: PA GF40.

Swivelling nut: Nickel-plated brass.

DN 65-125:

Cover: PBT, orange RAL 2011, grey RAL 7043.

Bracket: Alu EN44200

Cables: Halogen free

Dp sensor:

Sensor housing: Stainless steel X8CrNiS18-9 (No 1.4305 EN 10 088-3).

Membrane: Ceramic

Sealing: EPDM

AMETAL® is the dezincification resistant alloy of IMI Hydronic Engineering.

Surface treatment

DN 15-50: Non treated

DN 65-125: Electrophoretic painting

Ingress protection

IP54 (according to EN 60529)

Protection class

(according to EN 61140)

Certifications and directives

EMC-D. 2014/30/EU: EN 60730-1, -2-14.

Dp sensor: CE certification EN 61326-2-3.

PED: 2014/68/EU

Product standards EN 60730-x.

The table below assists you in finding the relevant product based on its variant. For more details, please download the datasheet above.

Art. No.