Multilux V Eclipse

With two-point connection for radiators with integrated valves and bathroom radiators, with automatic ﬂow limitation

Multilux V Eclipse is connected in two-pipe systems to radiators with a lower two-point connection such as bathroom radiators, design radiators, universal radiators or radiators with integrated valves. For radiators with integrated valves Multilux V Eclipse is also used as connection fitting without thermostatic head. The valve has a unique integrated ﬂow limiter that eliminates over ﬂows. The required ﬂow rate can be adjusted with one twist directly at the valve. The adjusted flow will not be exceed even if there are load changes in the system, due to other valves closing or during morning start up. The valve controls the flow rate independently from differential pressure. Therefore, complicated calculations to determine settings are not necessary. Centre-to-centre distance of connections 50 mm. Thermostatic insert and shut-off insert are interchangeable. Therefore the valve is suitable for installation both left and right side of the radiator.

Technical SpecificationsMultilux-V-Eclipse_EN_lq.pdf

Download BIM

Features and Benefits

Can be used as thermostatic valve or, for radiators with integrated valves, as a connection fitting

Integrated flow limiter

Eliminates over flows

Cover for angle and straight forms, white or chrome

Thermostatic insert and shut-off insert are interchangeable

The valve is suitable for installation both left and right side of the radiator

Easy draining off and filling

All versions suitable for R1/2 and G3/4 connection

Applications

Two-pipe heating systems

Functions

Control

Drain-off

Filling

Flow limitation

Shut-off

Dimensions

DN 15

Connection to thermostatic head and actuator

HEIMEIER M30x1,5

Temperature

Max. working temperature: 120 °C, with cover 90 °C

Min. working temperature: -10°C

Pressure class [PN]

PN 10

Pipe connection

G3/4 external thread for compression fittings for plastic, copper, precision steel or multi-layer pipe.

Surface treatment

Valve body and fittings are nickel-plated.

Marking

THE and II+ Designation.
Protection cap orange.

Material

Valve body: Corrosion resistant Gunmetal.
O-rings: EPDM rubber
Valve disc: EPDM rubber
Return spring: Stainless steel
Valve insert: Brass, PPS (polyphenylsulphide) and SPS (syndiotactic polystyrene)
The complete thermostatic insert can be replaced using the fitting tool without draining the system.
Spindle: Niro-steel spindle with double O-ring sealing.
Cover: ABS

Flow range

The flow can be stepless pre-set within the range: 10-150 l/h.

Factory setting: Commissioning

Differential pressure (ΔpV)

Max. differential pressure:

60 kPa (<30 dB(A))

Min. differential pressure:

10 – 100 l/h = 10 kPa

100 – 150 l/h = 15 kPa

Radiator connection

Adapters for R1/2 and G3/4, for radiator connections. Tolerance compensation ±1,0 mm with special union nuts and flexible flat seal system for installation free of tension.

Art. No.