TA-COMPACT-DP
For small pressure independent circuits
The TA-COMPACT-DP is the ideal solution for zone control of small circuits, enables setting of max. flow and prevent control valves from too high differential pressure. TA-COMPACT-DP combines 5 functions: differential pressure control, balancing, control, diagnostics and shut-off.
Product branding
Features and Benefits
5 in 1 concept reduces costs
The installation of a valve with 5 functions reduces the investment and the installation time.
Saves energy and money
Balanced and pressure independent circuits protects systems against over flows and too high energy consumption.
Zone control
Time controlled circuits can save up to 20% energy.
Noise protection
Differential pressure control protects control valves from too high differential pressure.
Applications
Heating and cooling systems.
Functions
Control
Differential pressure control
Isolation (for use during system maintenance – see "Leakage rate")
Measuring (ΔH, t, q)
Pre-setting (max. flow)
Pressure class [PN]
PN 16
Differential pressure (ΔH)
400 kPa = 4 bar
Min. differential pressure (ΔHmin):
DN 10: 20 kPa = 0,20 bar
DN 15: 18 kPa = 0,18 bar
DN 20: 21 kPa = 0,21 bar
DN 25: 25 kPa = 0,25 bar
(Valid for the most demanding settings. Other settings will require a lower ΔH. Check with graphs under "Sizing" or software HySelect.)
ΔHmax = The maximum allowed pressure drop over the circuit, to fulfill all stated performances.
ΔHmin = The minimum needed pressure drop over the circuit, for proper differential pressure control.,
Setting range
(ΔpL 10 kPa)
DN 10: 16-71 l/h
DN 15: 60-300 l/h
DN 20: 160-840 l/h
DN 25: 280-1500 l/h
Indication of recommended setting range. For more detailed information see "Sizing".
Temperature
Max. working temperature: 120°C
Min. working temperature: -20°C
Media
Water or neutral fluids, water-glycol mixtures (0-57%).
Characteristics
Linear, best suited for on/off control
Leakage rate
Leakage flow ≤ 0.01% of max. q, max (max. setting) and correct flow direction. (Class IV according to EN 60534-4).
Lift
4 mm
Actuators
See separate technical documentation on EMO T.
Marking
Grey handwheel: TA-COMPACT-DP and DN. ,
Connection
External thread according to ISO 228.
Connection to actuator
M30x1.5
Material
Valve body: AMETAL®
Valve insert: AMETAL®
Valve plug: Brass CW724R (CuZn21Si3P)
Spindle: Stainless steel
Spindle seal: EPDM O-ring
Δp insert: AMETAL®, PPS (polyphenylsulphide)
Membrane: EPDM and HNBR
Springs: Stainless steel
O-rings: EPDM
AMETAL® is the dezincification resistant alloy of IMI Hydronic Engineering.
| Art. No. |
|---|