Skip to main content
Thermostatic head VK

Thermostatic head VK

With clamp connection for radiators with integrated valves

The thermostatic head VK has been designed to be mounted on radiators with integrated valves. The clamp connection with locking ring enables a direct connection to thermostatic inserts which do not have an M30x1.5 connecting thread and to Danfoss RA valves.

Technical SpecificationsThermostatic_head_VK_EN_lq.pdf
Technical SpecificationsThermostatic_heads_General_EN_low.pdf

Product branding

imi_heimeier

Features and Benefits

Direct connection to radiators with integrated valve or Danfoss RA valves with clamp connection

Liquid-filled thermostat with high pressure power and precision control

With 2 clips for marking, limiting or blocking

Symbols for basic setting and nighttime set back

Brief data including the most important settings

Applications

Heating systems.

Functions

Temperature control

Frost protection.

Markings indicate upper and lower temperature range; two energy saving clips can be used to limit settings.

Temperature range is limited on both ends and can be blocked using covered stop clips.

Temperature

Max. sensor temperature: 50°C (122°F)

Nominal temperature range

6 °C - 28 °C

Control behavior

Control behavior: Proportional controller without auxilliary energy. Liquid-filled thermostat. High pressure power, lowest hysteresis, optimal closing time. Stable control behavior even in the case of small calculated p-band variation (<1K).

Marking

Heimeier
Setting numbers 1-5.
Symbols for basic setting and nighttime reduction.
Brief data including the most important settings.
Setting indicators on the face of the head and markings designed for the visually impaired.
Rotation direction indicator.

Colour

White RAL 9016

Connection

The thermostatic head VK can be mounted in several different positions, each at 90°.

The thermostatic head VK has been designed to be mounted on radiators with integrated valves. The clamp connection with locking ring enables a direct connection to thermostatic inserts which do not have an M 30 x 1.5 connecting thread

Material

ABS, PA6.6GF30, brass, steel,
Liquid-filled thermostat.

The table below assists you in finding the relevant product based on its variant. For more details, please download the datasheet above.