Dynatec Eclipse

Floor heating manifold with automatic ﬂow control

The Dynatec Eclipse adjusts the ﬂow rate in individual heating circuits directly in l/h. This means hydraulic balancing is achieved in one simple operation. The set ﬂow rate is constantly adapted, i.e. if the rate becomes too high - for instance due to the closing of adjacent circuits -, the Dynatec Eclipse will reduce the ﬂow automatically to the set value. The control cartridge always ensures a constant ﬂow, making Dynatec Eclipse heating circuit manifolds a time and cost-saving solution especially for system commissioning.

Technical SpecificationsDynatec_Eclips_EN_lq.pdf

Product branding

Features and Benefits

Automatic hydraulic balancing

Due to integrated flow controller inside each thermostatic insert

Shut-off valve for each heating circuit

in supply

Manifold made of stainless steel

Corrosion-resistant, durable and safe

Time and cost-saving commissioning solution

Applications

Floor heating systems

Functions

Draining

Filling

Flow limitation

Shut-off

Flushing

Individual room temperature control with actuator or thermostatic head with remote dial<

Venting

Pressure class [PN]

PN 10

Differential pressure (ΔpV)

Max. differential pressure:

60 kPa (<30 dB(A))

Min. differential pressure:

30 – 150 l/h = 15 kPa

150 – 300 l/h = 20 kPa

Flow range

The flow can be stepless pre-set within the range: 30-300 l/h.

Delivery setting: Commissioning setting.

Max. 2,5 m3/h per heating circuit manifold.

Temperature

Max. working temperature: 90°C

Min. working temperature: -5°C

Marking

IMI Heimeier

Orange protection cap.

Connection kits

The following manifold connection kits are available:

- Connection kit 1 with Globo ball valves.

- Connection kit 2 with STAD balancing valve and Globo ball valve.

- Connection kit 3 with Zeparo Vent air separator in supply pipe and Zeparo Dirt sludge separator in return.

- Connection kit 4 with Globo ball valve, including spacer for heat meter in return and Globo ball valve with connection for direct measurement in supply and return pipe.

- Connection kit 5 ﬁxed value control station with high-efﬁciency pump for controlling the supply temperature.

- Connection kit with ball valves, straight connection, including spacer for heat meter in return.

- Connection kit with ball valves, angle connection, including spacer for heat meter in return.

- Thermostatic mixing valve for radiant heating. Pump connection with ball valve.

Connection to thermostatic head and actuator

HEIMEIER M30x1,5

Material

Manifold:

Stainless steel 1.4301

Connection fittings: Nickel-plated brass.

Thermostatic insert:

Brass

O-rings: EPDM

Valve disc: EPDM

Spring: stainless steel

Thermostatic insert: Brass, PPS (polyphenylsulphide) and SPS (syndiotactic polystyrene)

Spindle: Niro-steel spindle with double O-ring seal.

Flow meter:

Heat-resistant plastic and stainless steel. Brass. EPDM seals.

Filling, draining, flushing and venting device:

Nickel-plated brass and plastic. EPDM seals.

The table below assists you in finding the relevant product based on its variant. For more details, please download the datasheet above.

Art. No.