Skip to main content
IMI Logo
Climate control
logo Climate Control
TA-Slider 160

TA-Slider 160

Digitally configurable proportional push actuator – 160/200 N

Digitally configurable actuators with or without change-over, and a wide range of setup options provide extensive flexibility for on-site parameter adaptation. Fully programmable binary input, relay and adjustable max. stroke of the valve bring new opportunities for advanced hydronic control and balancing.

Technical SpecificationsTA-Slider_160_EN_low.pdf
Download BIM

Product branding

imi_ta

Features and Benefits

Convenient, reliable setup

Fully customisable by smartphone via Bluetooth using a TA-Dongle.

Fully configurable

More than 200 setup options allow input and output signals, binary input, relay, characteristics and many other parameters to be configured.

Easy diagnostics

Tracks the last 10 errors to allow system faults to be found quickly.

Quick copying of settings

Setup configuration can be copied quickly from the TA-Dongle to identical TA-Slider actuators.

Temperature

Operating environment: 0°C – +50°C (5-95%RH, non-condensing)

Storage environment: -20°C – +70°C (5-95%RH, non-condensing)

Control speed

10 s/mm

Supply voltage [V]

24 VAC/VDC ±15%., Frequency 50/60 Hz ±3 Hz., CO version: , 24 VAC ±15%., Frequency 50/60 Hz ±3 Hz

Power consumption

Operation: 1.0 VA (VAC); 0.6 W (VDC)
Standby: 0.5 VA (VAC); 0.25 W (VDC)
I/OCO versions:
Operation: 1.3 VA (VAC); 0.7 W (VDC)
Standby: 0.5 VA (VAC); 0.25 W (VDC)
Plus version:
Operation: 1.8 VA (VAC); 1.0 W (VDC)
Standby: 0.5 VA (VAC); 0.25 W (VDC)
CO version: TA-M106 actuator consumption must be added separately

Input signal

0(2)-10 VDC, Ri 47 kΩ.

Adjustable hysteresis sensitivity 0.1-0.5 VDC; 0.33 Hz low pass filter.

Default setting: Proportional 0-10 VDC

Proportional: 0-10, 10-0, 2-10 or 10-2 VDC.

Proportional dual-range (for change-over): 0-3.3 / 6.7-10 VDC, 2-4.7 / 7.3-10 VDC, 0-4.5 / 5.5-10 VDC or 2-5.5 / 6.5-10 VDC.

Proportional split-range: 0-5, 5-0, 5-10 or 10-5 VDC; 0-4.5, 4.5-0, 5.5-10 or 10-5.5 VDC; 2-6, 6-2, 6-10 or 10-6 VDC.

Output signal

I/O, Plus, CO versions: 0(2)-10 VDC, max. 8 mA, min. 1.25 kΩ.

Default setting: Proportional 0-10 VDC

Ranges: See “Input signal”.

Stroke

6,9 mm

Automatic detection of the valve lift (stroke detection)

Noise level

Max. 30 dBA

Marking

Label: IMI TA, CE, product name, article No. and technical specification.,

Colour

White RAL 9016, grey RAL 7047.,

Adjusting force

160/200 N

Self-adjusting for IMI valves.

Connection to valve

Swivelling nut M30x1,5

Cable

1, 2 or 5 m. With wire end sleeves.
Halogen free as option, fire class B2ca – s1a, d1, a1 according to EN 50575.
TA-Slider 160: type LiYY, 3x0.25 mm2.
TA-Slider 160 I/O: type LiYY, 5x0.25 mm2.
TA-Slider 160 Plus: type LiYY, 5x0.25 mm2 and relay cable type H03VV-F, 3x0.75 mm2, with wire end sleeves.
TA-Slider 160 CO: type LiYY, 5x0.25 mm2 and relay cable type LiYY, 3x0.34 mm2, with connector to actuator TA-M106.

Ingress protection

IP54 all directions (according to EN 60529)

Protection class

(according to EN 61140)

III (SELV) TA-Slider 160, 160 I/O, 160 CO

II TA-Slider 160 Plus (protective insulation)

Certifications and directives

EMC-D. 2014/30/EU: EN 60730-1, -2-14.

LV-D. 2014/35/EU: EN 60730-1, -2-14.

RoHS-D. 2011/65/EU: EN 63000

Related products