Skip to main content
TA-MC50-C

TA-MC50-C

High performance proportional actuator – 500 N

High performance proportional actuators with automatic stroke adaptation which provide 3-point control when used together with 2-way and 3-way control valves from IMI Hydronic Engineering.

Technical SpecificationsTA-MC50-C_EN_low.pdf

Product branding

imi_ta

Features and Benefits

Easy commissioning

Automatic measurement and adaptation to the valve lift as well as load-dependent end position switch-off helps to reduce commissioning time and protect the valve and actuator from overloading.

Easy troubleshooting

Protected hand drive for a safe manual operation which enables easy troubleshooting.

Ease of service

The actuator housing cover is easy to remove. Parameters can easily be changed on site.

Functions

3-point control

Temperature

Max. medium temperature: 120°C

Operating environment: 0°C – +50°C (5-85%RH, non-condensing)

Storage environment: -20°C – +60°C (5-85%RH, non-condensing)

Control speed

22 s/mm

Supply voltage [V]

230 VAC ±10%, Frequency 50-60 Hz ±5%

Supply voltage

230 VAC

Power consumption

Idle/standby: 3.5 VA
Dimensioning: 9.9 VA
Nominal: 5.3 VA

Input signal

3-point control

Input signal

3-point

Stroke

Max. 10 mm,

Marking

IMI TA, CE, Article No, product name and technical specification.,

Colour

Black body and red cover.,

Adjusting force

500 N

Connection to valve

Swivelling nut M30x1.5 of brass

Cable

0.75 mm2, 1.5 m with wire end sleeve.

Ingress protection

IP40

Protection class

II (according to EN 60730)

Weight

0,20 kg

3rd Item Number

61050012

The table below assists you in finding the relevant product based on its variant. For more details, please download the datasheet above.