TA-MC55Y
High performance proportional actuator – 135 lbf (600 N)
High performance proportional actuators with automatic stroke adaptation which provide accurate modulating or 3-point control when used together with 2-way and 3-way control valves from IMI Hydronic Engineering.
Product branding
Features and Benefits
Easy commissioning
Automatic measurement and adaptation to the valve lift as well as load-dependent end position switch-off which helps to reduce commissioning time and protect the valve and actuator from overloading.
Easy troubleshooting
Protected hand drive for a safe manual operation which enables easy troubleshooting.
Ease of service
The actuator housing cover is easy to remove (without screws). Parameters can be easily changed on site.
Functions
Modulating control
Temperature
Max. ambient temperature: 140°F
Min. ambient temperature: 32°F
Control speed
0.26 or 0.47 in/min
Supply voltage [V]
24 VAC/VDC* ±10% Frequency 50-60 Hz ±5% *) DC – Direct current flat voltage.
Power consumption
24 V: 3,5 VA
115 V: 7 VA
Input signal
0(2)-10 VDC, R i ~77 kΩ, 0(4)-20 mA, R i ~510 Ω.
Signal direction and starting point adjustable by micro switches.
Output signal
0-10 VDC, max. 8 mA, min. 1,2 kΩ
Stroke
Automatic detection of the valve lift (stroke detection)
Max. 0.79 in
Marking
IMI TA, CE, Article No, product name and technical specification.
Colour
Black body and red cover.
Adjusting force
135 lbf
Connection to valve
Simple attachment to the valve by means of M8 screws. For some valve types an adapter may be needed. Information on adapters included in valve datasheets
Ingress protection
Automatic operation: IP54 Manual operation: IP30
Protection class
115 V: II
230 V: II
24 V: III
(according to EN 60730)
The table below assists you in finding the relevant product based on its variant. For more details, please download the datasheet above.
| Art. No. |
|---|