TA-Slider 500 BACnet/Modbus
Digitally configurable proportional push-pull actuator for Bus communication with BACnet MS/TP or Modbus RTU – 112/67 lbf (500/300 N)
Digitally configurable actuators for Bus communication with BACnet MS/TP or Modbus RTU, and a wide range of setup options provide extensive flexibility for on-site parameter adaptation. Fully programmable binary input, relay and adjustable maximum stroke of the valve bring new opportunities for advanced hydronic control and balancing.
Features and Benefits
Convenient, reliable setup
Fully customisable by smartphone via Bluetooth using a TA-Dongle.
Fully configurable
More than 200 setup options allow input and output signals, binary input, relay, characteristics and many other parameters to be configured.
Easy diagnostics
Tracks the last 10 errors to allow system faults to be found quickly.
Quick copying of settings
Setup configuration can be copied quickly from the TA-Dongle to identical TA-Slider actuators.
Noise level
Max. 30 dBA
Supply voltage [V]
24 VAC/VDC ±15%. Frequency 50/60 Hz ±3 Hz
Connection to valve
Swivelling nut M30x1,5
Ingress protection
IP54 all directions (according to EN 60529)
Temperature
Media temperature: max. 248°F
Operating environment: 32°F to 122°F (5-95%RH, non-condensing)
Storage environment: -4°F to 158°F (5-95%RH, non-condensing)
Input signal
0(2)-10 VDC, Ri 47 kΩ.
0.33 Hz low pass filter.
Adjustable hysteresis sensitivity 0.1-0.5 VDC.
By BACnet/Modbus or with hybrid control mode
Default setting: By BACnet/Modbus. If Hybrid mode chosen, default input signal is Proportional 0-10 VDC.
Proportional: 0-10, 10-0, 2-10 or 10-2 VDC.
Proportional dual-range (for change-over): 0-3.3 / 6.7-10 VDC, 2-4.7 / 7.3-10 VDC, 0-4.5 / 5.5-10 VDC or 2-5.5 / 6.5-10 VDC.
Proportional split-range: 0-5, 5-0, 5-10 or 10-5 VDC; 0-4.5, 4.5-0, 5.5-10 or 10-5.5 VDC; 2-6, 6-2, 6-10 or 10-6 VDC.
Control speed
101.6 or 154 s/in (4 or 6 s/mm).
Default setting: 101.6 s/in (4 s/mm).
Output signal
BACnet/Modbus
Adjusting force
Pull 67 lbf (300 N)
Push 112 lbf (500 N)
Protection class
III (SELV)
(according to EN 61140)
Stroke
0.64 in (16.2 mm)
Automatic detection of the valve lift (stroke detection)
Certifications and directives
EMC-D. 2014/30/EU: EN 60730-1, -2-14.
LV-D. 2014/35/EU: EN 60730-1, -2-14.
RoHS-D. 2011/65/EU: EN 63000
Cable
Separate overmoulded cables (see Additional equipment).
Type LiYCY 5x22 AWG (5x0.34 mm2) (cables A and B) and type LiYY 6x22 AWG (6x0.34 mm2) (cable C).
Halogen free, fire class B2ca – s1a, d1, a1 according to EN 50575.
Relay cable (R24 version):
Type LiYY 3x22 AWG (3x0.34 mm2).
3.28 ft, 6.56 ft or 16.4 ft. With wire end sleeves.
Halogen free, fire class B2ca – s1a, d1, a1 according to EN 50575.
Colour
White RAL 9016, grey RAL 7047.
Marking
Label: IMI TA, CE, product name, article No. and technical specification.
Material
Cover: PC/ABS GF8
Housing: PA GF40.
Swivelling nut: Nickel-plated brass.
Power consumption
Operation: < 3.0 VA (VAC); < 1.5 W (VDC)
Standby: < 1.5 VA (VAC); < 0.75 W (VDC)
| Art. No. |
|---|